If your radiator is taking ages to warm up a room, you don’t necessarily need to call a plumber – it might just need a good clean
February’s chill means it’s crucial to have your radiators in tip-top shape as temperatures dive below freezing.
If you’re finding your radiator is lukewarm with cold patches or it’s slow to heat up a room, don’t rush to dial a plumber – it might just need a good clean.
Trade Radiators’ guru Ben Clarke points out that a build-up of grime can affect the heating element in your radiator. He explained: “Radiators are essential for maintaining a cosy home during colder months in the UK.”
“However, they often accumulate dust, debris and greasy fingerprints, which can impact their energy efficiency, make them look a bit unsightly and can even cause them to smell when they get hot.”
A thorough cleaning not only boosts your radiator’s heating power but also cuts down on energy use, potentially easing the strain on your wallet when it comes to bills, reports the Express.
Here’s how to give your radiator a proper scrub
Cleaning products
- Washing up liquid or white vinegar
- Warm water
- Long handled duster
Method
- Firstly, turn off your heating and wait for the radiator to cool completely.
- Lay a towel at the base to shield your carpet from any mess.
- Start by dusting off the radiator. A vacuum with a slim nozzle works, but a long-handled duster is even better, especially for those tricky spots behind the unit.
- Don’t forget to banish any cobwebs or dust from the wall area behind the radiator too.
- Next, add some washing-up liquid (or white vinegar) to a bucket of warm water. Ensure the water is not boiling as this could potentially damage the radiator.
- Submerge a sponge into the bucket, squeeze out any excess water, and clean the surface of the radiator. Pay special attention to any areas that appear particularly dirty.
- After cleaning the radiator, rinse it with fresh warm water using a new sponge. Make sure all soap residue has been thoroughly removed.
- Dry the radiator with a towel and ensure it is completely dry before turning the heating back on.
- Your radiator should now be fully cleaned and hopefully functioning correctly. If you continue to experience problems, you may need to bleed your radiator or seek professional advice.